When you first get your Humminbird Helix unit, you’ll want to get it up and running as quickly as possible so you can start using it on the water. This guide walks you through the Quick Setup process to ensure your Helix is configured correctly from the start.
-
Powering On: Start by pressing the Power Key to turn on the unit. You’ll be prompted to select the start-up mode—choose Normal to run the unit on the water.
-
Language Selection: The Quick Setup will prompt you to select your preferred language. Navigate with the scroll pad and press right to select.
-
Max Depth Setting: This setting determines the bottom range of your sonar readings. For most users, leaving it on Auto is sufficient, allowing the Helix to automatically adjust based on water depth.
-
Water Type: Choose between Freshwater, Shallow Saltwater, or Deep Saltwater depending on where you’re fishing. This helps the unit optimize sonar readings for your specific environment.
-
Connected Transducer: The unit should automatically detect the connected transducer. If you’re using an additional transducer like MEGA 360 or MEGA Live, select it from the menu.
By following these steps, your Humminbird Helix will be set up and ready to use in no time, allowing you to focus on what really matters—catching fish.