How to Identify Your Garmin LiveScope Transducer: LVS32, LVS34, LVS62, LVS42HD, or LVS44
Buying a LiveScope settings guide for the wrong transducer means starting with the wrong information. Garmin has five commonly encountered models that can all be called LiveScope in conversation, but the LVS32, LVS34, LVS62, LVS42HD, and LVS44 are not the same transducer.
Here is the fastest way to know what you have:
- Look at the source label in the bottom-left corner of the full-screen LiveScope view.
- Confirm the model or Garmin part number on the transducer cable tag.
- Follow the cable and see whether it connects to a GLS 10 black box or directly to the chartplotter.
- Use the housing shape and dimensions as a final check.
Do not buy from the shape alone if you can still read the screen or cable tag.
Quick Identification Table
| Model | Garmin part number | Housing dimensions | Wiring | Fast visual clue |
|---|---|---|---|---|
| LVS32 | 010-12784-03 | 5.37 x 3.8 x 1.75 in. | 20-foot, 21-pin cable to GLS 10 | Short block with a deep triangular lower wedge |
| LVS34 | 010-02706-10 | 6.37 x 3.05 x 1.88 in. | 21-pin cable to GLS 10 | Compact, narrow rectangular bar |
| LVS62 | 010-02719-10 | 8.20 x 3.98 x 2.76 in. | 21-pin cable to GLS 10 | Much longer and thicker bar |
| LVS42HD | 010-03899-00 | 5.2 x 5.3 x 1.9 in. | 7-pin direct connection, no GLS 10 | Compact upright housing with two green status lights |
| LVS44 | 010-03899-10 | 6.3 x 5.6 x 1.9 in. | 7-pin direct connection, no GLS 10 | Larger upright housing with a wider lower crossbar |
The dimensions are for the transducer housing. An installed mounting bracket, adjustment knob, or third-party pole mount can make the complete assembly look larger. If your receipt or paperwork shows 010-01864-00, that is the original LiveScope system package containing the GLS 10 and LVS32. The transducer-only part number is 010-12784-03.
1. Check the Bottom-Left Corner of the LiveScope Screen
Open a full-screen LiveScope Forward, Down, or Perspective view. Look in the lower-left corner for the source label. It will usually include the connected LiveScope model, such as LVS32, LVS34, LVS62, LVS42HD, or LVS44.
If the lower-left label is missing, shortened, or unclear, do not stop there. Software versions and screen layouts can change how source information is displayed. Confirm it with the cable tag or part number.
2. Read the Tag on the Transducer Cable
Turn the system off before tracing the cable. Follow the cable from the transducer toward the connector and look for an identification tag wrapped around the cable. Depending on the installation, the easiest tag to reach may be near the connector, inside a wiring compartment, or along the section secured to the trolling motor shaft.
You are looking for either the model name or a Garmin part number:
| Printed number | Transducer |
|---|---|
| 010-12784-03 | LVS32 |
| 010-02706-10 | LVS34 |
| 010-02719-10 | LVS62 |
| 010-03899-00 | LVS42HD |
| 010-03899-10 | LVS44 |
Also inspect the rear or bottom of the transducer for an identification sticker or laser-marked regulatory label. The visible front of the housing may only say GARMIN. Do not assume the model number will be printed where you can see it from the bow.
If the tag is damaged, take a clear photo of every remaining number. One readable Garmin part number is more dependable than trying to identify the unit from a mounted side view.
3. Follow the Cable to See Whether You Have a GLS 10 Black Box
The wiring divides these five transducers into two families.
Cable runs to a GLS 10 sonar module
Within these five models, that means you have an LVS32, LVS34, or LVS62. All three use a 21-pin connection to the GLS 10.
Then compare the housing size:
- The LVS32 is the short, blocky housing with the deep triangular wedge below it.
- The LVS34 is the slimmer horizontal bar with a rail-like top.
- The LVS62 is the oversized XR transducer. It is longer, taller, thicker, and much heavier-looking on the mount.
Cable runs directly to the chartplotter and power
That points to the LVS42HD or LVS44. Both LiveScope 2 models use a 7-pin connection and do not require the GLS 10 black box.
The LVS42HD and LVS44 look similar enough that the cable tag or screen label should make the final call. Do not unplug a sealed connector just to count pins if the tag is readable.
4. Compare the Housing Shape and Size
LVS32: the short block with a triangular lower wedge
The original LVS32 is shorter and more compact than the LVS34 or LVS62. Its cable exits from a raised neck on top of a blocky body, and a deep triangular wedge or fin projects below the main housing. The visible side has a large GARMIN wordmark rather than the LVS32 model name.
If the cable runs to a GLS 10 and the transducer looks more like a compact wedge than a long bar, check for part number 010-12784-03.
LVS34: the compact rectangular bar
The LVS34 has the familiar LiveScope Plus shape. It is a narrow rectangular body with the cable exiting from the top, a rail-like upper section, and a large adjustment knob on the mounting bracket. It is longer and more rail-shaped than the LVS32 but much smaller than the LVS62.
LVS62: the oversized XR bar
The LVS62 keeps the long bar-style layout, but it is hard to mistake for the LVS34 when they are seen at the same scale. The LVS62 measures 8.20 inches long and has a deeper, bulkier body with a larger mounting structure.
If the transducer looks like a large block hanging from the mount and the cable runs to a GLS 10, check for part number 010-02719-10.
LVS42HD: the smaller upright LiveScope 2 body
The LVS42HD does not look like a long bar. It has an upright wing or shield-shaped housing, a circular center mount point, ribbed panels, and two small green status-light windows near the top. At 5.2 x 5.3 inches across its face, it is the more compact of the two new direct-connect models.
LVS44: the larger upright LiveScope 2 body
The LVS44 uses the same basic upright design, including the circular center and green status lights, but its housing is larger. The lower section has a more pronounced crossbar and foot, and the body measures 6.3 x 5.6 inches across its face.
The difference between the LVS42HD and LVS44 is easier to see side by side than on a boat. If you have only one in front of you, trust the model label or part number first.
Clues That Do Not Prove Which LiveScope You Have
Do not identify the transducer from any of these by themselves:
- How clean the sonar image looks
- How far you can see on the screen
- The color palette
- Forward, Down, or Perspective mounting position
- A third-party pole or bracket
- The GARMIN logo on the visible face
Screen results change with settings, installation, bottom type, and fishing conditions. A screen that looks sharp does not prove it is an LVS42HD, and a long range scale does not prove it is an LVS62 or LVS44.
Which Fishfinder Coach Product Matches Each Model?
The safest rule is simple: choose only the product option that names your exact transducer. Do not substitute one Garmin model for another.
| Your confirmed model | What to choose |
|---|---|
| LVS32 | Choose Garmin LVS32/LVS34 LiveScope in the Forward Facing Sonar Bundle. |
| LVS34 | Choose Garmin LVS32/LVS34 LiveScope in the Forward Facing Sonar Bundle. |
| LVS42HD | Use the Garmin LVS42HD LiveScope 2 Settings Guide. |
| LVS44 | Use the Garmin LVS44 LiveScope 2 Settings Guide. |
| LVS62 | Do not select the LVS32/LVS34 option. A dedicated LVS62 choice is not currently listed. |
That product list was checked on July 13, 2026. New LiveScope 2 options may be added later, but the rule does not change. The model printed in the selector should match the model you confirmed on the screen or tag.
Once you know what you have, the dialed-in numbers and the full forward-facing sonar course are inside the Forward Facing Sonar Bundle when the selector lists your exact model. If you run an LVS32 or LVS34 and also use side imaging or down imaging, the Full Boat Bundle covers both systems in one package.
